Professional Series Jig Saw Td10155 – 100% Copper – 350 Watts

TIEDAO Professional Series JIG SAW TD10155 is a jigsaw made up of an electric motor and a reciprocating saw blade. A jigsaw with a bevel function on the sole plate allows cutting angles of typically up to 45 degrees relative to the normal vertical stroke for cutting miter joints.
Specifications:

• Rated Input Power : 350 Watts
• Stroke Length : 26mm
• Cutting Depth : Wood 60mm
• Cutting Depth : Steel 6mm
• No-load Speed : 0-2600r/min

There are 2 main types of blade fitting in use. The older type uses a screw to hold the blade; the newer type slots in.

A wide variety of blade types are used, including:

• various numbers of TPI (Teeth Per Inch)
• blade edge for cutting soft materials
• cranked blades to overcome the setback of the blade and allow flush cutting
• thin blades to allow tighter curves to be cut
• push stroke cutting blades to avoid damage to the top surface

Control is an issue with jigsaws. The blades are small, weak and entirely unsupported at the lower end. Good cut control requires the presence of blade rollers, which keep the blade aligned just above the sole plate. Heavy cast sole plate saws are somewhat better than pressed steel for sawing line control too. To guide a jigsaw on curved cut, it must be steered (turned) and not forced to move sideways. The usage of sharp blades is important as well to get high quality cuts.